|Home||» Products||» Two Component Injection Pump|
Two Component Injection Pump
These are the high pressure grouting machines, which is used in the structure insertion, accoutered with super pressure. To solve out the difficulty of the bearer, it is structured with a light weight and is the best pick for the stanch worker.
Speedy Structure: Can be made to 10000 PSI in a few seconds, the working duration will be shorter in comparison with other machines.
Low gross: It has a weight of 9.00 KG, simple to carry.
Easy maintenance: Can be set without particular training, to obviate the delay for the machine fixture.
Standing Pressure: Can be emanated into the small slot efficaciously, and enfold the leaking.
- Gross: 9.00 Kg
- Maximum Output Pressure: 11000 PSI
- Star-up: < 7500 PSI
- Safety Range of High-pressure pipe: < 14000 PSI
- Safety Scope of On-off Device: < 18000 PSI
- Safety Scope of Butter Head: < 16000 PSI
- Machine Structure
- High pressure pipe of 5 meters
- Switch Valve Suit (that includes Butter Head)
- Electric Drill Device
- Fixing Saddlebag.
- Single line emission of pre-mixed resins
- Simple operation and light weighted structure.
- Functions with remote switches
- Simple flush after utilization
- Applicative for the cracks such as construction crack, flexing crack and instruction crack of concrete and building projection.
- Cracking of girder, pole, building, board etc. structure, dispense epoxy resin with high-handed.
- Help in the sewage disposing pool etc.
- Leak fixing for wall pipe, floor as well as wall corner.
- Grouting or concreting of dam and storage tank for leak stoppage of the water transporting passageway, water conservancy task, flowing control of the concrete crack of the ridge.
- Also utilized for the leak stopping for floor, below-ground channels and underground garage.
- Used for the leak stoppage in the breast wall during geological drilling project.